اسئلة الاوشا محتاجه حل

[عبدالرحمن454]

سلام عليكم ورحمة الله بركاته ....

مساء الخيررر للجميع ... اخواني احد عارف يحل لي هذي الاسئله من المتخصصيين في السلامه والاوشا

. The hazard assessment required by OSHA's Hazard Communication Standard, should begin with a walk-through survey of the facility to develop a list of potential hazards in each of the following categories, except _____.
Heat/cool Chemical Impact Ergonomics

2. Which type of face protection should be worn to provide eye protection from moderate impact and particles encountered in job tasks such as carpentry, woodworking, grinding, scaling, etc.
Goggles Welding shield Protective eyeglasses Face shield

3. Engineering controls used to eliminate or reduce exposure to noise include all of the following, except _____.
Redesign the equipment Enclose the source Replace equipment Review work procedures

4. Overexposure to harmful dusts, chemicals or radiation are all examples of _____.
physical hazards acute hazards health hazards chronic hazards

5. OSHA requires the use of personal protective equipment (PPE) to _____.
reduce hazardous conditions replace administrative controls increase employee safety reduce employee exposure to hazards

6. According to the Bureau of Labor Statistics (BLS), nearly _____ workers are injured because they do not wear eye protection.
four out of every five two out of five three out of five one out of every two

7. OSHA mandates that controlling occupational diseases caused by breathing contaminated air should be done primarily by _____.
engineering controls educational controls administrative controls enforcement controls

8. Random inspections must be conducted _____ by a qualified individual to assure that respirators are properly selected, used, cleaned, and maintained.
quarterly monthly frequently annually

9. When the oxygen concentration in normal breathing air drops below _____ by volume, the air becomes oxygen deficient.
19.5 percent 22.5 percent 21.5 percent 15.5 percent

10. Insulating equipment may still be used if this is the only defect detected:
Embedded foreign object Change in color Holes, tears, punctures or cuts Ozone cutting or checking

11. PPE is required wherever the conditions listed below are encountered that are capable of causing injury or impairment by in all of the following ways, except _____.
repelled inhaled physical contact absorbed

12. A first critical step in developing a comprehensive safety and health program is to identify physical and health hazards in the workplace by conducting a _____.
hazard assessment accident investigation incident report job hazard analysis

13. To be adequately protective, the employer must select a respirator that is appropriate for which of the following hazard characteristics?
The chemical state and physical form of the contaminant. The frequency of exposure to the contaminant. The duration of exposure to the contaminant. The toxicity and dose of the contaminant.

14. The PPE rules provide that rings, wristwatches, earrings, bracelets, and other jewelry may be worn if approved when workers may come into contact with power driven machinery or electric circuitry.
False True

15. When training multiple employees, an individual's skills related to the use of PPE is best measured by _____.
written tests hands-on demonstration lecture and group exercises oral or written exam

16. Moving objects, fluctuating temperatures, and high intensity lighting are examples of _____.
psycho-social hazards exposures physical hazards health hazards

17. Which On-the-Job (OJT) step protects the trainee because the trainer performs the procedure?
Step 4. Learner tells and does Step 1. Introduction Step 2. Trainer tells and does Step 3. Learner tells - Trainer does

18. According to the Bureau of Labor Statistics (BLS), workers injured while not wearing protective eyewear most often said _____.
they believed it wasn't required by the situation management doesn't provide me with any PPE they aren't comfortable or they bother me they are not stylish or they make me look funny

19. Back belts may be considered personal protective equipment because they physically "protect" you from lower back injuries.
True False

20. Personal protective equipment is most often used _____ engineering and administrative controls.
to reduce the need for as a replacement for in conjunction with prior to the use of

 

[عبدالرحمن454]

. What level of evaluation can a supervisor perform during his or her normal daily routine?
Level 1 - Evaluation that measures reaction Level 2 - Evaluation that measures learning Level 3 - Evaluation that measures application Level 4 - Evaluation that measures results

2. Certification at this level may be used to verify an employee is "fully qualified."
Level 1 - Evaluation that measures reaction Level 2 - Evaluation that measures learning Level 3 - Evaluation that measures application Level 4 - Evaluation that measures results

3. Physical injury, illness, damage to equipment, high workers' compensation costs, and low employee morale are all examples of ____.
system consequences external consequences internal consequences natural consequences

4. According to ANSI Z490.1-2009, trainers should be able to apply _____ appropriate to the target audience and the learning objectives.
principles and practices fundamental goals theories and applications adult learning principles

5. Training should be conducted using a systematic process that includes:
Needs assessment Learning objectives Course materials All of the above

6. When does safety training work best?
As part of an integrated safety management system When it is segregated from other safety programs When it is a tightly controlled process As a series of unrelated training sessions

7. What evaluation method measures the non-monetary impact of safety training on the organization?
Level 1 - Evaluation that measures reaction Level 2 - Evaluation that measures learning Level 3 - Evaluation that measures application Level 4 - Evaluation that measures results

8. In the workplace, your "role" is usually described as your _____.
relationship duty position responsibility

9. According to 29 CFR 1910.120, Appendix E, Training Curriculum Guidelines, what testing methods would be acceptable?
All group members agree to question answers Each member of a group may answer at least one question Each student individually answers each question Students confer with each other to answer questions

10. What role is involved with helping an employee assess personal safety competencies, values, and goals?
Instructor Counselor Manager Analyst

11. Safety education focuses on why safety is important. Safety training focuses primarily on _____.
when to do something where to do something how to do something who should do something

12. According to OSHA guidelines on Instructor Competencies, trainers who have successfully completed specialized training which has been certified in writing by a professional organization, are considered to be _____.
designated authorized certified qualified

13. According to 29 CFR 1910.120, Appendix E, Training Curriculum Guidelines, the Safety Training Director should conduct _____ written audit of the training program.
a weekly a biannual a continuous a quarterly an annual

14. At what point would a supervisor be able to certify an employee as "fully qualified" to perform a hazardous procedure?
After completing an on-the-job evaluation Anytime after passing a written exam After three days of on-the-job training After completing a classroom evaluation

15. Evaluation at this level is suitable for certifying employees as "initially qualified."
Level 1 - Evaluation that measures reaction Level 2 - Evaluation that measures learning Level 3 - Evaluation that measures application Level 4 - Evaluation that measures results

16. What educational strategy is the most common form presented in the workplace?
Technical safety training General safety instruction Management safety training Operational safety instruction

17. When you see the word, "demonstrate" in an OSHA standard, it means the employee must "prove" to the employer that he or she is proficient.
True False

18. Why should supervisors and managers be fully involved in training safety?
To learn which employees need help It displays superior management skills It verifies organizational ability It sends a strong message of corporate leadership

19. Which method may be best at determining the ultimate success of a training program?
Survey students about the quality of the training class Evaluate changes that result in reduced injury rates Questionnaires or informal discussions with employees Observe employee performance before and after training

20. Changes to safety training or testing should be conducted on a small scale in order to _____.
increase randomness reduce errors limit the variables decrease entropy reduce control

 

[sayed00]

اخى عبد الرحمن حاول انت تحل الاسئلة و تعرض اجاباتك و سوف تحد من يعرض عليك التصحيح لما قمت بة

اما ان تعرض الاسئلة لتجد من يحلها لك غير واقعى

تحياتى

 

[عبدالرحمن454]

اشكرك اخي سيد على مرورك بارك الله فيك .... لقد قمت بحل كثير منها ولكن انا تخصصي ليس بالسلامه المهنيه ولكن الكورس هذا مطلوب علينا في العمل
وكذالك في كثير من الاسئله محتاجه الى خبره مهنيه او كتاب للمراجعه ....

 

[هشام بن صالح]

يعطيك العافيه وشكرا لك