بسم الله الرحمن الرحيم
هذا الكتاب من وجهة نظرى كنز لان به معلومات لا تقدر بثمن لأى مهندس
فهو يتحدث بالتفصيل عن جميع أنواع الصيانات
ثم يتطرق لشرح كل قسم على حده كصيانة المعدات الكهربائية ثم الميكانيكية وهكذا
وهذا هو فهرس الكتاب
Chapter 3. Predictive Maintenance R. Keith Mobley 2.15
Chapter 4. Maintenance Work Order Planning Richard (Doc) Palmer 2.31
Chapter 5. An Introduction to the Computer in Maintenance
Craig A. Atwater 2.41
Chapter 6. Computerized Planning and Scheduling Richard Davies 2.49
Chapter 7. Maintenance Stores and Inventory Control Dave Bertolini 2.79
Chapter 8. Maintenance Storerooms John C. Martin 2.99
Chapter 9. Internet for Maintenance and Engineering Joel Levitt 2.109
Section 3 Establishing Costs and Control
Chapter 1. Economics of Preventive Maintenance R. Keith Mobley 3.3
Chapter 2. Work Measurement R. Keith Mobley 3.13
Chapter 3. Rating and Evaluating Maintenance Workers Frank Halchin 3.59
Chapter 4. Work Simplification in Maintenance Raymond I. Reul 3.83
Chapter 5. Estimating Repair and Maintenance Costs Nicholas Fostar 3.101
Section 4 Maintenance of Plant Facilities
Chapter 1. Maintenance of Low-Sloped Membrane Roofs
Donald R. Mapes and Dennis J. McNeil 4.3
vi *******S
Chapter 2. Concrete Industrial Floor Surfaces: Design, Installation, Repair,
and Maintenance Robert F. Ytterberg 4.19
Chapter 3. Painting and Protective Coatings Bryant (Web) Chandler 4.29
Chapter 4. Maintenance and Cleaning of Brick Masonry Structures
Brian E. Trimble 4.49
Chapter 5. Maintenance of Elevators and Special Lifts Jerry Robertson 4.65
Chapter 6. Air-Conditioning Equipment Martin A. Scicchitano 4.75
Chapter 7. Ventilating Fans and Exhaust Systems Richard P. Wojcik 4.107
Chapter 8. Dust-Collecting and Air-Cleaning Equipment Lee Twombly
and Samuel G. Dunkle 4.135
Chapter 9. Piping Tyler G. Hicks 4.149
Chapter 10. Scaffolds and Ladders Colin P. Bennett 4.183
Section 5 Maintenance of Mechanical Equipment
Chapter 1. Plain Bearings William A. Yahraus and George R. Kingsbury 5.3
Chapter 2. Rolling-Element Bearings Daniel R. Snyder 5.19
Chapter 3. Flexible Couplings for Power Transmission Donald B. Cutler 5.45
Chapter 4. Chains for Power Transmission Frank B. Kempf 5.73
Chapter 5. Cranes: Overhead and Gantry William S. Chapin 5.83
*******S vii
Chapter 6. Chain Hoists R. C. Dearstyne 5.91
Chapter 7. Belt Drives Tom Lovin 5.101
Chapter 8. Mechanical Variable-Speed Drives Edward F. Krome, Jr. 5.129
Chapter 9. Gear Drives and Speed Reducers Robert G. Smith 5.147
Chapter 10. Reciprocating Air Compressors M. F. Baecker 5.173
Chapter 11. Valves Joseph J. Haddad 5.185
Chapter 12. Pumps: Centrifugal and Positive Displacement R. Keith Mobley 5.201
Section 6 Maintenance of Electrical Equipment
Chapter 1. Electric Motors James S. Bowers and Frank W. Ceney 6.3
Chapter 2. Maintenance of Motor Control Components Kenneth L. Paape 6.49
Chapter 3. Maintenance of Industrial Batteries (Lead-Acid, Nickel-Cadmium,
Nickel-Iron) Richard L. Kreutzfeldt 6.88
Chapter 4. Illumination Ricky Smith 6.115
Section 7 Sanitation and Housekeeping
Chapter 1. Organizing the Sanitation-Housekeepng Personnel Carl L. Hagan 7.3
Chapter 2. Maintaining Plant Sanitation and Housekeeping Carl L. Hagan 7.19
viii *******S
Chapter 3. Industrial Housekeeping Carl L. Hagan 7.41
Chapter 4. Cleaning Industrial Plant Offices Gorman Sterzinger and
Carl L. Hagan 7.55
Section 8 Instruments and Reliability Tools
Chapter 1. Mechanical Instruments for Measuring Process Variables
R. Keith Mobley 8.3
Chapter 2. Electrical Instruments for Measuring, Servicing, and Testing
R. Keith Mobley 8.43
Chapter 3. Vibration: Its Analysis and Correction R. Keith Mobley 8.71
Chapter 4. An Introduction to Thermography R. Keith Mobley 8.109
Chapter 5. Tribology R. Keith Mobley 8.131
Section 9 Lubrication
Chapter 1. The Organization and Management of Lubrication F. Alverson,
T. C. Mead, W. H. Stein, and A. C. Witte 9.3
Chapter 2. Lubricating Devices and Systems Duane C. Allen 9.15
Chapter 3. Planning and Implementing a Good Lubrication Program
R. Keith Mobley 9.29
Section 10 Maintenance Welding
Chapter 1. Arc Welding in Maintenance J. E. Hinkel 10.3
*******S ix
Chapter 2. Gas Welding in Maintenance
Engineers of L-TEC Welding and Cutting Systems 10.63
Section 11 Chemical Corrosion Control and Cleaning
Chapter 1. Corrosion Control Denny Bardoliwalla and Klaus Wittel 11.3
Chapter 2. Industrial Chemical Cleaning Methods Robert Haydu,
W. Emerson Brantley III, and Jerry Casenhiser 11.17
Index I.1
x *******S
الرابط
هذا الكتاب من وجهة نظرى كنز لان به معلومات لا تقدر بثمن لأى مهندس
فهو يتحدث بالتفصيل عن جميع أنواع الصيانات
ثم يتطرق لشرح كل قسم على حده كصيانة المعدات الكهربائية ثم الميكانيكية وهكذا
وهذا هو فهرس الكتاب
Chapter 3. Predictive Maintenance R. Keith Mobley 2.15
Chapter 4. Maintenance Work Order Planning Richard (Doc) Palmer 2.31
Chapter 5. An Introduction to the Computer in Maintenance
Craig A. Atwater 2.41
Chapter 6. Computerized Planning and Scheduling Richard Davies 2.49
Chapter 7. Maintenance Stores and Inventory Control Dave Bertolini 2.79
Chapter 8. Maintenance Storerooms John C. Martin 2.99
Chapter 9. Internet for Maintenance and Engineering Joel Levitt 2.109
Section 3 Establishing Costs and Control
Chapter 1. Economics of Preventive Maintenance R. Keith Mobley 3.3
Chapter 2. Work Measurement R. Keith Mobley 3.13
Chapter 3. Rating and Evaluating Maintenance Workers Frank Halchin 3.59
Chapter 4. Work Simplification in Maintenance Raymond I. Reul 3.83
Chapter 5. Estimating Repair and Maintenance Costs Nicholas Fostar 3.101
Section 4 Maintenance of Plant Facilities
Chapter 1. Maintenance of Low-Sloped Membrane Roofs
Donald R. Mapes and Dennis J. McNeil 4.3
vi *******S
Chapter 2. Concrete Industrial Floor Surfaces: Design, Installation, Repair,
and Maintenance Robert F. Ytterberg 4.19
Chapter 3. Painting and Protective Coatings Bryant (Web) Chandler 4.29
Chapter 4. Maintenance and Cleaning of Brick Masonry Structures
Brian E. Trimble 4.49
Chapter 5. Maintenance of Elevators and Special Lifts Jerry Robertson 4.65
Chapter 6. Air-Conditioning Equipment Martin A. Scicchitano 4.75
Chapter 7. Ventilating Fans and Exhaust Systems Richard P. Wojcik 4.107
Chapter 8. Dust-Collecting and Air-Cleaning Equipment Lee Twombly
and Samuel G. Dunkle 4.135
Chapter 9. Piping Tyler G. Hicks 4.149
Chapter 10. Scaffolds and Ladders Colin P. Bennett 4.183
Section 5 Maintenance of Mechanical Equipment
Chapter 1. Plain Bearings William A. Yahraus and George R. Kingsbury 5.3
Chapter 2. Rolling-Element Bearings Daniel R. Snyder 5.19
Chapter 3. Flexible Couplings for Power Transmission Donald B. Cutler 5.45
Chapter 4. Chains for Power Transmission Frank B. Kempf 5.73
Chapter 5. Cranes: Overhead and Gantry William S. Chapin 5.83
*******S vii
Chapter 6. Chain Hoists R. C. Dearstyne 5.91
Chapter 7. Belt Drives Tom Lovin 5.101
Chapter 8. Mechanical Variable-Speed Drives Edward F. Krome, Jr. 5.129
Chapter 9. Gear Drives and Speed Reducers Robert G. Smith 5.147
Chapter 10. Reciprocating Air Compressors M. F. Baecker 5.173
Chapter 11. Valves Joseph J. Haddad 5.185
Chapter 12. Pumps: Centrifugal and Positive Displacement R. Keith Mobley 5.201
Section 6 Maintenance of Electrical Equipment
Chapter 1. Electric Motors James S. Bowers and Frank W. Ceney 6.3
Chapter 2. Maintenance of Motor Control Components Kenneth L. Paape 6.49
Chapter 3. Maintenance of Industrial Batteries (Lead-Acid, Nickel-Cadmium,
Nickel-Iron) Richard L. Kreutzfeldt 6.88
Chapter 4. Illumination Ricky Smith 6.115
Section 7 Sanitation and Housekeeping
Chapter 1. Organizing the Sanitation-Housekeepng Personnel Carl L. Hagan 7.3
Chapter 2. Maintaining Plant Sanitation and Housekeeping Carl L. Hagan 7.19
viii *******S
Chapter 3. Industrial Housekeeping Carl L. Hagan 7.41
Chapter 4. Cleaning Industrial Plant Offices Gorman Sterzinger and
Carl L. Hagan 7.55
Section 8 Instruments and Reliability Tools
Chapter 1. Mechanical Instruments for Measuring Process Variables
R. Keith Mobley 8.3
Chapter 2. Electrical Instruments for Measuring, Servicing, and Testing
R. Keith Mobley 8.43
Chapter 3. Vibration: Its Analysis and Correction R. Keith Mobley 8.71
Chapter 4. An Introduction to Thermography R. Keith Mobley 8.109
Chapter 5. Tribology R. Keith Mobley 8.131
Section 9 Lubrication
Chapter 1. The Organization and Management of Lubrication F. Alverson,
T. C. Mead, W. H. Stein, and A. C. Witte 9.3
Chapter 2. Lubricating Devices and Systems Duane C. Allen 9.15
Chapter 3. Planning and Implementing a Good Lubrication Program
R. Keith Mobley 9.29
Section 10 Maintenance Welding
Chapter 1. Arc Welding in Maintenance J. E. Hinkel 10.3
*******S ix
Chapter 2. Gas Welding in Maintenance
Engineers of L-TEC Welding and Cutting Systems 10.63
Section 11 Chemical Corrosion Control and Cleaning
Chapter 1. Corrosion Control Denny Bardoliwalla and Klaus Wittel 11.3
Chapter 2. Industrial Chemical Cleaning Methods Robert Haydu,
W. Emerson Brantley III, and Jerry Casenhiser 11.17
Index I.1
x *******S
الرابط
