اسئلة الاوشا محتاجه حل

عبدالرحمن454

عضو جديد
إنضم
30 مارس 2013
المشاركات
25
مجموع الإعجابات
8
النقاط
0
سلام عليكم ورحمة الله بركاته ....

مساء الخيررر للجميع ... اخواني احد عارف يحل لي هذي الاسئله من المتخصصيين في السلامه والاوشا

. The hazard assessment required by OSHA's Hazard Communication Standard, should begin with a walk-through survey of the facility to develop a list of potential hazards in each of the following categories, except _____.
Heat/cool
Chemical
Impact
Ergonomics
2. Which type of face protection should be worn to provide eye protection from moderate impact and particles encountered in job tasks such as carpentry, woodworking, grinding, scaling, etc.
Goggles
Welding shield
Protective eyeglasses
Face shield

3. Engineering controls used to eliminate or reduce exposure to noise include all of the following, except _____.
Redesign the equipment
Enclose the source
Replace equipment
Review work procedures

4. Overexposure to harmful dusts, chemicals or radiation are all examples of _____.
physical hazards
acute hazards
health hazards
chronic hazards

5. OSHA requires the use of personal protective equipment (PPE) to _____.
reduce hazardous conditions
replace administrative controls
increase employee safety
reduce employee exposure to hazards

6. According to the Bureau of Labor Statistics (BLS), nearly _____ workers are injured because they do not wear eye protection.
four out of every five
two out of five
three out of five
one out of every two

7. OSHA mandates that controlling occupational diseases caused by breathing contaminated air should be done primarily by _____.
engineering controls
educational controls
administrative controls
enforcement controls

8. Random inspections must be conducted _____ by a qualified individual to assure that respirators are properly selected, used, cleaned, and maintained.
quarterly
monthly
frequently
annually

9. When the oxygen concentration in normal breathing air drops below _____ by volume, the air becomes oxygen deficient.
19.5 percent
22.5 percent
21.5 percent
15.5 percent

10. Insulating equipment may still be used if this is the only defect detected:
Embedded foreign object
Change in color
Holes, tears, punctures or cuts
Ozone cutting or checking

11. PPE is required wherever the conditions listed below are encountered that are capable of causing injury or impairment by in all of the following ways, except _____.
repelled
inhaled
physical contact
absorbed

12. A first critical step in developing a comprehensive safety and health program is to identify physical and health hazards in the workplace by conducting a _____.
hazard assessment
accident investigation
incident report
job hazard analysis

13. To be adequately protective, the employer must select a respirator that is appropriate for which of the following hazard characteristics?
The chemical state and physical form of the contaminant.
The frequency of exposure to the contaminant.
The duration of exposure to the contaminant.
The toxicity and dose of the contaminant.

14. The PPE rules provide that rings, wristwatches, earrings, bracelets, and other jewelry may be worn if approved when workers may come into contact with power driven machinery or electric circuitry.
False
True

15. When training multiple employees, an individual's skills related to the use of PPE is best measured by _____.
written tests
hands-on demonstration
lecture and group exercises
oral or written exam

16. Moving objects, fluctuating temperatures, and high intensity lighting are examples of _____.
psycho-social hazards
exposures
physical hazards
health hazards

17. Which On-the-Job (OJT) step protects the trainee because the trainer performs the procedure?
Step 4. Learner tells and does
Step 1. Introduction
Step 2. Trainer tells and does
Step 3. Learner tells - Trainer does

18. According to the Bureau of Labor Statistics (BLS), workers injured while not wearing protective eyewear most often said _____.
they believed it wasn't required by the situation
management doesn't provide me with any PPE
they aren't comfortable or they bother me
they are not stylish or they make me look funny

19. Back belts may be considered personal protective equipment because they physically "protect" you from lower back injuries.
True
False

20. Personal protective equipment is most often used _____ engineering and administrative controls.
to reduce the need for
as a replacement for
in conjunction with
prior to the use of
 

مواضيع مماثلة

عبدالرحمن454

عضو جديد
إنضم
30 مارس 2013
المشاركات
25
مجموع الإعجابات
8
النقاط
0
. What level of evaluation can a supervisor perform during his or her normal daily routine?
Level 1 - Evaluation that measures reaction
Level 2 - Evaluation that measures learning
Level 3 - Evaluation that measures application
Level 4 - Evaluation that measures results
2. Certification at this level may be used to verify an employee is "fully qualified."
Level 1 - Evaluation that measures reaction
Level 2 - Evaluation that measures learning
Level 3 - Evaluation that measures application
Level 4 - Evaluation that measures results

3. Physical injury, illness, damage to equipment, high workers' compensation costs, and low employee morale are all examples of ____.
system consequences
external consequences
internal consequences
natural consequences

4. According to ANSI Z490.1-2009, trainers should be able to apply _____ appropriate to the target audience and the learning objectives.
principles and practices
fundamental goals
theories and applications
adult learning principles

5. Training should be conducted using a systematic process that includes:
Needs assessment
Learning objectives
Course materials
All of the above

6. When does safety training work best?
As part of an integrated safety management system
When it is segregated from other safety programs
When it is a tightly controlled process
As a series of unrelated training sessions

7. What evaluation method measures the non-monetary impact of safety training on the organization?
Level 1 - Evaluation that measures reaction
Level 2 - Evaluation that measures learning
Level 3 - Evaluation that measures application
Level 4 - Evaluation that measures results

8. In the workplace, your "role" is usually described as your _____.
relationship
duty
position
responsibility

9. According to 29 CFR 1910.120, Appendix E, Training Curriculum Guidelines, what testing methods would be acceptable?
All group members agree to question answers
Each member of a group may answer at least one question
Each student individually answers each question
Students confer with each other to answer questions

10. What role is involved with helping an employee assess personal safety competencies, values, and goals?
Instructor
Counselor
Manager
Analyst

11. Safety education focuses on why safety is important. Safety training focuses primarily on _____.
when to do something
where to do something
how to do something
who should do something

12. According to OSHA guidelines on Instructor Competencies, trainers who have successfully completed specialized training which has been certified in writing by a professional organization, are considered to be _____.
designated
authorized
certified
qualified

13. According to 29 CFR 1910.120, Appendix E, Training Curriculum Guidelines, the Safety Training Director should conduct _____ written audit of the training program.
a weekly
a biannual
a continuous
a quarterly
an annual

14. At what point would a supervisor be able to certify an employee as "fully qualified" to perform a hazardous procedure?
After completing an on-the-job evaluation
Anytime after passing a written exam
After three days of on-the-job training
After completing a classroom evaluation

15. Evaluation at this level is suitable for certifying employees as "initially qualified."
Level 1 - Evaluation that measures reaction
Level 2 - Evaluation that measures learning
Level 3 - Evaluation that measures application
Level 4 - Evaluation that measures results

16. What educational strategy is the most common form presented in the workplace?
Technical safety training
General safety instruction
Management safety training
Operational safety instruction

17. When you see the word, "demonstrate" in an OSHA standard, it means the employee must "prove" to the employer that he or she is proficient.
True
False

18. Why should supervisors and managers be fully involved in training safety?
To learn which employees need help
It displays superior management skills
It verifies organizational ability
It sends a strong message of corporate leadership

19. Which method may be best at determining the ultimate success of a training program?
Survey students about the quality of the training class
Evaluate changes that result in reduced injury rates
Questionnaires or informal discussions with employees
Observe employee performance before and after training

20. Changes to safety training or testing should be conducted on a small scale in order to _____.
increase randomness
reduce errors
limit the variables
decrease entropy
reduce control
 

sayed00

عضو جديد
إنضم
31 مايو 2005
المشاركات
1,274
مجموع الإعجابات
50
النقاط
0
اخى عبد الرحمن حاول انت تحل الاسئلة و تعرض اجاباتك و سوف تحد من يعرض عليك التصحيح لما قمت بة

اما ان تعرض الاسئلة لتجد من يحلها لك غير واقعى

تحياتى
 

عبدالرحمن454

عضو جديد
إنضم
30 مارس 2013
المشاركات
25
مجموع الإعجابات
8
النقاط
0
اشكرك اخي سيد على مرورك بارك الله فيك .... لقد قمت بحل كثير منها ولكن انا تخصصي ليس بالسلامه المهنيه ولكن الكورس هذا مطلوب علينا في العمل
وكذالك في كثير من الاسئله محتاجه الى خبره مهنيه او كتاب للمراجعه ....
 
أعلى